Pay attention to these matters when configuring UPS

When considering the capacity problem in the process of selecting the equipment room UPS, the relevant factors determining the size of the capacity should be listed, and the specific relationship between each factor and the capacity should be specified. The reference factors for determining the UPS capacity are: actual load capacity, type of load, capacity utilization rate, environmental conditions, type of UPS and actual load capacity, and potential capacity expansion requirements.
1, the actual load capacity: This is the most fundamental factor in determining the size of the UPS. The output capacity of the UPS must meet or exceed the load requirements to ensure normal power supply. In practical applications, consider whether the UPS uses centralized or distributed power. The total amount of load using centralized power supply should be the cumulative power of all the power supplies supplied by the UPS in the equipment room. The use of distributed power supply is determined according to the load of each UPS.
2. Type of load: Different types of loads have different ratios of active power and reactive power, but the UPS needs to provide sufficient active power and reactive power to the load at the same time, and the actual output capability is limited by the load type. Taking a UPS with a power factor of 0.7 as an example, the general calculation method is: the VA value of the resistive load = W value ÷ 0.7; the VA value of the inductive load = W value ÷ 0.3.
3, UPS capacity utilization rate: For high-power UPS, it is generally recommended that the capacity utilization rate be controlled at 0.6 to 0.8.
4. Environmental conditions: The operating temperature of the UPS should generally be controlled within the range of 0 to 40 °C. For every 1000m increase after an altitude of more than 1000m, the UPS should be derated by 5%.
5, UPS type and actual load capacity: different types of UPS its load capacity is different. The output capability of the power frequency machine is better, and the actual load capacity of the high frequency machine is only 0.9 times that of the power frequency machine.
6. Potential capacity expansion of equipment: The UPS capacity should be considered in consideration of the future expansion of the equipment, leaving a certain margin.

 In strict accordance with ISO 9001:20015 and all company procedures;
    1.Make process card and quality plan
    2.Choose the qualified raw material and do incoming test, not allowed      
     nonconforming material to enter into production process;
    3.Producing and testing followed the quality documents 
    4.Be good at Quality records and product identification to ensure the product 
    5.Do the final inspection to ensure 100% of pass.

Wind Power Anchor Flange

Anchor Flange,Wind Power Anchor Flange,Custom Wind Power Anchor Flange,High Quality Power Anchor Flange

Shanxi Tianbao Group Co.,Ltd. ,